Ready Mix Plaster SC is a Portland cement-based, self-cured, and weather-resistant surfacing material. It can be applied to flat, curved, or rusticated bases made from concrete, clay masonry, or concrete masonry, either by hand or sprayed directly from a mixer hopper. With a proven history of durability, Portland cement-based plaster offers excellent workability and versatility, allowing for a wide range of shapes, designs, and textures that are permanently preserved once the plaster hardens. It is categorized based on the type of cement binder, number of coats, and total thickness. The formulation typically includes blended Portland cement and lime, along with carefully selected additives that control setting time, minimize shrinkage cracking, enhance workability, and improve long-term durability.

This solvent-free bonding agent is designed for joining old and new concrete, providing strong adhesion on both horizontal and vertical surfaces, whether wet or dry. It is ideal for use in roads, bridges, and various RCC works, ensuring durable and reliable bonding performance.

This modified styrene-butadiene emulsion is formulated as a bonding aid and gauging liquid for cement systems. It offers excellent resistance to hydrolysis, making it suitable for both external and internal applications.

This low-viscosity, alkali-reactive emulsion forms a continuous film over concrete surfaces to effectively reduce evaporation. By enhancing hydration and minimizing shrinkage, it ensures improved durability. It is particularly suitable for infrastructure, commercial, and residential projects where no final finishing layers are required.

This high-quality, water-based acrylic curing compound is designed to be sprayed on fresh or exposed concrete surfaces. It forms a non-membrane, moisture-retaining coating that ensures effective curing. Suitable for residential, commercial, pre-cast, and infrastructure projects, it eliminates the need to scrape CureEx CA before any finishing application.

This ready-to-use thin block adhesive is specially designed for AAC, concrete, and fly ash blocks. It offers high tensile strength and excellent spreadability while retaining water and providing self-curing properties. The product is available in 25 kg and 40 kg packing options, ensuring convenience for different project requirements.

Heat resistance, high strength, non shrink grout for application in high temperature zones, temperatures as high as 500 degree celsius.

It is a special cementitious non shrinking grout for gap thickness upto 125mm having high early strength & fast setting time

It is a high strength ready to use dry powder for heavy duty support beneath load bearing units especially where static & dynamic forces occur.

It is a special cementitious grout for gap thickness upto 50mm having high early strength and fast setting time.

Ultra high strength free flow non-shrink grout its microcellular structure with high frost, fire & oil resistance properties.

Multipurpose cement based precision grout for static & dynamic loads.

It is a blend of specially processed cement, pregraded fillers & additives giving controlled expansion

This monolithic, non-metallic, ready-to-use floor hardener is formulated with abrasion- and wear-resistant aggregates of high Moh’s hardness. It produces a dense, non-slip, and rust-proof finish, making it suitable for a wide range of deck surfaces. The material also helps eliminate shrinkage and cracking issues, ensuring long-lasting durability.

This cementitious mortar, blended with sharp sand and polymer additives, is available in strength grades M-25, M-40, M-60, and M-80. It also comes with self-curing properties, offering enhanced versatility. The mortar is commonly used as a damp-proof membrane or floating finish in balconies, podiums, parking decks, and open gantries.

Single component high strength tile adhesive for marble & granite of medium sizes confirming to type-3 tile adhesive as per is 15477:2019.

Two component polymer based high strength tile adhesive for marble/granite & stone confirming to type-4 as per is 15477:2019.

Cement-based, non-shrinking, high adhesion confirming to type-1 tile adhesive.

All purpose cement-based, non-shrink, water-resistant adhesive confirming to type-2.

This polymer-modified, flowable repair mortar offers a strength range of M40–M100, making it suitable for high-strength reinforcement repairs in tight zones. It is ideal for jacketing and repairing vertical surfaces such as columns and partitions. Unlike self-curing variants, this material requires curing to achieve its optimal performance.

This is a single-component, acrylic polymer-modified fairing coat and pinhole filler used as a cosmetic layer for concrete. It effectively fills pores, blowholes, and surface flaws, serving as a skim coat before the application of protective finishes. The material provides an aesthetic, uniform finish that blends seamlessly with repaired and regular concrete surfaces.

This is a flowable, self-curing, high-strength repair mortar designed for tie-rod and tie-strip pocket filling as well as RCC structural repairs. It can be conveniently applied using a grout gun equipped with varied thickness heads, ensuring precise application and reliable performance.

This product is a non-shrink, self-curing cementitious micro-concrete with a strength range of 40–100 MPa. It is ideal for use in Mivan structures, beams, columns, and ceiling repairs, and is specifically designed for vertical repair applications. The material requires no post-curing and provides a durable, crack-resistant finish.

NGPL- MicroEx PHF is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. It exhibits excellent thermal compatibility with concrete, and is fully compatible with other NGPL range of mortars and protective coatings

For general purpose of waterproofing which can be used in concrete for flat & slop slabs, beams, columns, waterretaining structures as well as in plaster & bricks.

For waterproofing coat of roofs, podiums, balconies, floor, slabs, suspended floors, patios, bathrooms, inspections pits, swimming pools, bridges decks.

Horizontal, vertical or overhead applications, exterior (positive side) or interior (negative side), waterproofing of new or old below grade foundations balconies, plaza decks, in combination with a uv protection, underneath tile mortas (showers, sanitary rooms, kitchens, water, wastewaters, sea water & marine aquarium tank & other reinforced concrete structures)

For purpose such as it can be used for Waterproofing of roof, bathroom, Balcony, water retaining structure etc., As a bond coat between old & new Concrete, as a repair mortar modifier For brick masonry & plastering, as a Repair mortar for spalled concrete & Plaster, as corrosion preventive coat For reinforcement, to fill wide cracks.

As an waterproofing agent, admixture to improve flexibility, adhesion, water impermeability characteristics of cementitious mixes of renders, sereeds, repair mortars, adhesives slurries.

High Performance concrete superplasticiser, based on polycarboxylic
technology, it is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long
lateral chains. This greatly improves cement dispersion.

High performance low viscosity PCE based admixture for early strength, is a high performance superplasticizer suitable for precast concrete industry to obtain high early strength and moderate workability retentions are required.

High Performance, High Range Water Reducing & Retarding Admixture, it has been specially formulated to give high water reductions up to 20% without loss of workability or to produce high quality concrete of reduced permeability.

Accelerator SpeedSet AC, under the NGPL ADMEX umbrella, is designed to fast-track concrete setting and early strength development. This admixture is perfect for urgent timelines and colder climates.

Retarder From the NGPL ADMEX range, SetControl RT extends setting time to support precision during placement. Ideal for warm climates long distance transport, or mass pours where workability is critical.

Water Reducer (Plasticizer) Part of the NGPL ADMEX range, FlowMax WR is a high-performance water-reducing admixture that improves workability without affecting strength. Ideal for heavily reinforced or architecturally demanding concrete, it enhances flow and finish.